Rheological properties |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Molding shrinkage (parallel) |
0.3 |
% |
ISO 294-4, 2577 |
|
|
||||
Mechanical properties |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Tensile Modulus |
13000 |
MPa |
ISO 527-1/-2 |
|
Charpy impact strength (+23°C) |
8.5 |
kJ/m² |
ISO 179/1eU |
|
Charpy notched impact strength (+23°C) |
3.8 |
kJ/m² |
ISO 179/1eA |
|
|
||||
Thermal properties |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Temp. of deflection under load (8.00 MPa) |
120 |
°C |
ISO 75-1/-2 |
|
|
||||
Electrical properties |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Relative permittivity (100Hz) |
5.5 |
- |
IEC 60250 |
|
Dissipation factor (100 Hz) |
0.02 |
E-4 |
IEC 60250 |
|
Volume resistivity |
1E11 |
Ohm*m |
IEC 60093 |
|
Surface resistivity |
1E12 |
Ohm |
IEC 60093 |
|
Electric strength |
29 |
kV/mm |
IEC 60243-1 |
|
Comparative tracking index |
250 |
- |
IEC 60112 |
|
|
||||
Other properties |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Density |
1890 |
kg/m³ |
ISO 1183 |
|
|
||||
Test specimen production |
Value |
Unit |
Test Standard |
|
CAMPUS/ISO Data |
|
|||
Injection Molding, injection temperature |
125 |
°C |
ISO 10724 |
|
injection velocity |
170 |
mm/s |
ISO 10724 |
|
hold pressure |
100 |
MPa |
ISO 10724 |
|
cure time |
25 |
min |
ISO 10724 |
|
Compression Molding, mold temperature |
160 |
°C |
ISO 295 |
|
cure time |
1 |
min |
ISO 295 |
|
|